Description
Quickjack BL-5000SLX portable car lift system
Meet your new best friend in the garage and at the track. The QuickJack BL-5000SLX portable car lift system revolutionizes the way you work. No more fumbling with ramps and jacks. With QuickJack, you’re maintenance-ready in seconds flat.
The 5,000-lb. capacity BL-5000SLX car lift is made from the same materials found in a professional shop or garage. But, there’s one key difference. You can take the BL-5000SLX with you almost anywhere. Toss it in a large trunk or backseat when you’re on the move, and stow it away in a corner when you’re done. After the initial one-time assembly, setting up your QuickJack is a snap. Just drop it on the floor, connect the power and position the rubber blocks underneath the lift points. That’s it! Press Up on the pendant control, and watch your car lift do its thing!
With a mere 3″ collapsed height, the QuickJack is more versatile than other car lifts. Not to mention, auto-locking safety arms keep you safer than any jack or stand ever could. No cross members. No bolts in your concrete. The QuickJack BL-5000SLX matches to almost any vehicle length and width in its weight class.
The new design better accommodates shorter wheelbases and/or smaller lift point spreads, making this our most clever and versatile design yet. For instance, we’ve eliminated a problem some Porsche owners experienced where the frames would make contact with the tires. Despite the new reduced frame length, the maximum lift point reach on the new BL-5000SLX model is unchanged.
If you need to reach longer wheelbases than permitted by this car lift, check out the extended-length BL-5000EXT.
Quickjack BL-5000SLX Features
Automatic safety locks
Features dual-position automatic safety locks. As the frames rise, these locks glide securely into place. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.
Reduced overall length
We shaved off 3″ end-to-end. This makes QuickJack easier to stow in tight spaces and more able to service vehicles with narrow wheelbases. The maximum lift point reach is unaffected by the change.
Improved lift point access
By extending each rubber block tray an inch toward the center of the frame, the minimum lift point reach is now 2″ less than it was before. This allows our portable car lift to accommodate smaller vehicles, like Porches, with ease.
One-handed operation
By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during “liftoff.”
Tech specs
Lifting capacity
Lowered height
Lifting height
Lift point spread
Frame dimensions (ea.)
Other specs
What’s inside?
BL-5000SLX Left Frame Assembly
BL-5000SLX Right Frame Assembly
1x Hydraulic power unit with control
4x Medium rubber lift blocks (2″)
4x Tall rubber lift blocks (3″)
2x Short hydraulic hoses
2x Long hydraulic hoses
2x Frame-positioning handles
Fittings and thread tape for setup
Instruction manual
Requirements:
3 liters of Automatic Transmission Fluid
Air source to inflate air cylinders up to 50 PSI
Assembly tools
Note: QuickJack is shipped in three boxes
The Quickjack BL-5000SLX is manufactured by the biggest autmotive supplier, BendPak
English 
Nederlands 
Deutsch 
Français
Reviews
There are no reviews yet.