Quickjack BL-6000XLT

Code: bl-6000xlt

The 6,000-lb. capacity BL-6000XLT is a super-long portable car lift with one of the widest lift point spreads in the industry. For drivers of some electric cars or vehicles with exceptionally long wheelbases, these frames are the only way to go. Ideal for detailing and wheel service on EVs.

1.625,00 Ex. VAT

Out of stock


Why did we make the BL-6000XLT portable car lift system?

The Quickjack BL-6000XLT has the distinction of being our only car lift series to feature a single model. Its frames are super-long, even longer than our extended-length EXT series. This frame length is ideal for extremely long wheelbases, so this model fits virtually all contemporary EV cars, including top-end, luxury electric vehicles with lift points that run to the extreme edges of the vehicle frame.

QuickJack’s cantilevered frames are specially designed so they won’t rub against your vehicle’s tires as they rise. And since every QuickJack is a premium QuickJack, you get the same open-center car lift design and rolling portability of our SLX and EXT models. Of course, it also comes standard with automatic safety locks.

But seriously, why?

The SLX car lift series fits 90% of our customers’ needs. The EXT series covers most other vehicles. That leaves 1 – 2% of long-wheelbase cars not covered by QuickJack. Strictly from a business perspective, we could probably get away with leaving our product offerings alone and just say, “Good luck,” to those we can’t service.

But that’s not us.

Everyone should have the ability to work on all their cars, professionally or otherwise. We know the future is here, and the future includes an incoming tide of fully electric (EV) vehicles with long wheelbases/lift point spreads. As the market stands today, there are no options for raising some of these vehicles without a full-size four-post. The BL-6000XLT is the only car lift, including scissor lifts and pit lifts, with a lift point spread that’s long enough to get the job done.

As luxury EV vehicles become more commonplace, we know auto shops and garages are going to need a portable/compact lift to work on these cars. Not every shop has a four-post or two-post, and smaller shops, such as many privately owned auto detailing shops, might not be able to fit one in their space. That’s why they get scissor lifts and low or mid-rise lifts. Unfortunately, super-long-wheelbase vehicles can’t be raised by these lifts. That’s what makes the BL-6000XLT so unique. It also has a robust weight capacity to handle electric sedans, which tend to be heavier than comparably sized gas-powered cars. With a lift point spread that’s longer than the frame length of an SLX model, we sincerely doubt you’ll find a vehicle that’s 6,000 lbs. or under with a wheelbase too long for this lift (outside of semi-trucks, commercial buses/mass transit vehicles, etc.).

XLT Car Lift Design

The BL-6000XLT portable car lift is a full 17″ longer than the SLX model and about 10″ longer than the EXT model (comparison below). While the frames are longer and a little heavier than other models, they’re still convenient to roll around your garage or shop, thanks to the durable urethane construction of the wheels.

SLX minimum lift point spread: 29.5″
EXT minimum lift point spread: 35.5″
XLT minimum lift point spread: 47.5″

SLX maximum lift point spread: 60″
EXT maximum lift point spread: 66″
XLT maximum lift point spread: 76″

SLX overall frame length: 69″
EXT overall frame length: 76″
XLT overall frame length: 86″

Features Quickjack BL-6000XLT

Automatic safety locks

The 6,000-lb. capacity BL-6000XLT features the same automatic mechanical locks as our SLX and EXT models. Your QuickJack is safe to lift anything (under the weight limit) that reaches the lift points.

Extended lift point spread

With a lift point range of 47.5″ – 76″, there isn’t much the XLT can’t handle. Its minimum range covers most sports cars, sedans, light-duty trucks, etc. Its maximum range makes it one of the only—if not the only—car lift that can lift vehicles with the longest wheelbases on the consumer market.

One-touch button control

The single touch of a button lifts the electric-hydraulic frames, getting your vehicle over 21″ in the air in about 30 seconds. One more push safely lowers vehicles onto the mechanical locks. Leave your precious cargo raised for minutes, hours, days, weeks or even months—however long it takes to finish your work.

Built-in hydraulic flow divider

The flow divider, built right into the power unit, ensures the frames lift evenly at all times. This is necessary because there is no crossbar(s) to act as a “brace” or mechanical leveler. Since the freedom of our open-center design is one of QuickJack’s most attractive features—and virtually no one else offers it—the promise of a level rise and descent is the most important one we can make.

Tech specs Quickjack BL-6000XLT

Lifting capacity

7,000 lbs. (3,175 kg)

Lowered height

A – Frame only: 3.5″ (89 mm)
B – With 2″ block: 3.75″ (95 mm)

Lifting height

C – Frame only: 18″ (457 mm)
D – With 2″ block: 18.25″ (464 mm)
E – With 3″ block: 19.25″ (489 mm)
F – Max. height: 21.25″ (540 mm)
G – With adapters: 21.25″ (540 mm)
H – With adapters + pin: 24″ (610 mm)

Lift point spread

I – Maximum: 76″ (1,930 mm)
J – Minimum: 47.5″ (1,207 mm)

Frame dimensions (ea.)

K – Width: 12.5″ (318 mm)
L – Length: 86.5″ (2,197 mm)
A – Height: 3.5″ (89 mm)
Weight: 110 lbs. (50 kg)

Other specs

Time to full rise: 30 seconds
Power unit weight: 15 lbs. (7 kg)
Total shipping weight: 282 lbs. (128 kg)

What’s inside? Quickjack BL-6000XLT

BL-6000XLT Left Frame Assembly

BL-6000XLT Right Frame Assembly

1x Hydraulic power unit with control

4x Medium rubber lift blocks (2″)

4x Tall rubber lift blocks (3″)

2x Short hydraulic hoses

2x Long hydraulic hoses

2x Frame-positioning handles

Fittings and thread tape for setup

Instruction manual


3 liters of Automatic Transmission Fluid

Air source to inflate air cylinders up to 50 PSI

Assembly tools

Note: QuickJack is shipped in three boxes

Do you ship to my country?

The Quickjack BL-6000XLT is manufactured by the biggest autmotive supplier, BendPak


Additional information

Dimensions 160 × 40 × 160 cm


There are no reviews yet.

Be the first to review “Quickjack BL-6000XLT”

Your email address will not be published. Required fields are marked *